In recent years, plastic drainage pipes have been increasingly widely adopted in drainage systems. Thanks to their light weight, easy installation and excellent sealing performance, they have gradually replaced reinforced concrete pipes and cast iron pipes. Especially with the vigorous promotion of rainwater drainage systems, innovation has emerged in the manhole industry — plastic inspection wells have been developed to address the differential settlement issue between building materials of different types.

Common plastic drainage pipes available on the market include PVC pipes and PE double-wall corrugated pipes. These two types follow different specification measurement standards, resulting in dimensional discrepancies among plastic drainage pipes manufactured by different suppliers. This creates minor challenges for construction contractors. When poor sealing occurs at pipe joints, heat-shrinkable anti-corrosion materials are required for remediation. Heat shrinkable tape and heat shrinkable sleeve are commonly used to achieve reliable sealing. However, many field construction personnel lack a clear understanding of these two products, leading to a frequently asked question: When should we use a heat shrinkable sleeve, and when is heat shrinkable tape the right choice? Are there relevant standards? How do we select the proper product? Today, the After-sales Service Department of Yayuan Plastic will explain the similarities and differences between these two products.

Heat shrinkable tape and heat shrinkable sleeve for plastic drainage pipe joint sealing

Similarities between Heat Shrinkable Sleeve and Heat Shrinkable Tape

Primary Application Both heat shrinkable sleeves and heat shrinkable tapes are anti-corrosion materials for anti-corrosion field joint sealing of pipelines, serving identical functions and can be used interchangeably.

Raw Materials They are manufactured from the same adhesive heat-shrinkable materials.

Product Performance Their technical performance is nearly identical. Both will automatically shrink and tightly cling to the pipe surface once reaching the required temperature.

Applicable Standards Both comply with Technical Standard for Polyethylene Coating of Buried Pipelines SY/T0413-2002 and the national standard GB/T 23257-2009.

Heat shrinkable tape and heat shrinkable sleeve for plastic drainage pipe joint sealing

Differences between Heat Shrinkable Sleeve and Heat Shrinkable Tape

Product Form A heat shrinkable sleeve is tubular, also known as a closed sleeve or field joint sleeve. Heat shrinkable tape is sheet-shaped, also called open sleeve or field joint tape. A complete heat shrinkable tape set includes the main sheet, matching fixing patch and adhesive strips.

Manufacturing Process Their manufacturing processes differ due to product shape:

  1. In the extrusion phase, heat shrinkable sleeves are extruded into tubular blanks while heat shrinkable tapes are extruded into sheets.
  2. Heat shrinkable sleeves need to be individually expanded to the finished diameter by an expander. In contrast, heat shrinkable tapes undergo synchronous stretching during extrusion.
  3. For adhesive coating: heat shrinkable sleeves adopt semi-mechanical plus manual gluing; small-size sleeves are fully hand-glued. Heat shrinkable tapes are fully automatically coated on the whole sheet.
  4. After gluing and trimming, heat shrinkable sleeves can be printed, packed and warehoused. Heat shrinkable tapes need to be cut to specified sizes, assembled with fixing patches and adhesive strips before integrated packaging and storage.

Application Method A heat shrinkable sleeve must be pre-slid onto the pipe before pipe welding, then heated and shrunk after joint assembly. Heat shrinkable tape has no such restriction and can be applied at any time. Due to the difference in geometry, the operating procedures and precautions during heat shrinking also vary between the two products.

Price Difference Driven by manufacturing processes:

Heat shrinkable tape and heat shrinkable sleeve for plastic drainage pipe joint sealing

Field Construction Tips

Whether using heat shrinkable tape or heat shrinkable sleeve, always heat from the centre towards both edges. Allow natural shrinkage and avoid forcing the shrinking process. When applying heat shrinkable tape, the overlap/closure joint must be positioned on the top of the pipe. If it is difficult to heat the bottom of the pipe, dig a recess below the pipe for convenient torch operation.

Should you have any questions, please call the 24-hour after-sales support hotline of Yayuan Plastic: 0371-55929311

Leave a Reply

Your email address will not be published. Required fields are marked *